CARONLAB PROFESSIONAL WAX HEATER, 1LT

Characteristics:

• 33.8floz capacity
• Removable Protective Skirt
• Removable Drip Tray
• Temperature Control Dial
• Locking Lid
• 27.1floz Metal Insert

Benefits:

• Temperature Control Dial allows Estheticians to easily control Wax temperature
• Protective Skirt and Drip Tray allow for quick, convenient cleaning
• Melts all Hard, Strip and Film Waxes quickly and evenly
• 12 month Warranty provides peace of mind and quality assurance

When to use:

Professional Wax Heater 33.8floz is perfect for use during any professional Waxing service. It quickly and evenly melts all forms of Wax including Beads, Trays and Caronlab Australia Microwave to Pot™ 27.1floz jars.

Setup Instructions – Hard and Film Wax

• Remove Professional Wax Heater 33.8floz from packaging. Place Professional Wax Heater 33.8floz’s Protective Skirt on top of the unit and click into place.
• Place Metal Insert inside the Wax Heater. When set up correctly, Metal Insert’s Plastic Rim and Handle should sit just visible inside Professional Wax Heater 33.8floz’s Protective Skirt.
• Plug the Wax Heater into a power socket and press ‘ON/OFF’ switch to ‘ON’.
• Follow Heating and Usage Instructions as per the product packaging on your Wax. For ultimate convenience, Caronlab Australia Microwave to Pot™ jars can be placed directly into the Metal Insert.
• After operation, turn the Wax Heater ‘OFF’.

Setup Instructions – Strip Wax

• Remove Professional Wax Heater 1lt from packaging. Place Metal Insert inside the Wax Heater.
• Place Caronlab Australia Microwave to Pot™ 27.1floz Wax jar directly into the Metal Insert, or decant your melted Wax into the Metal Insert as per Heating Instructions on product packaging.
• Place the Drip Tray on top of Professional Wax Heater 1lt and its accompanying Metal Insert.
• Click Drip Tray into place. The Wiping Bar may be positioned towards the front, left or right of the Wax Heater, to adapt to the preferences of each Therapist and setup of each Salon. When set up correctly, Drip Tray should sit flat on top of Wax Heater, covering the entirety of the Metal Insert including Plastic Rim and Handle.
• Plug the Wax Heater into a power socket and press ‘ON/OFF’ switch to ‘ON’.
• Follow Usage Instructions as per the product packaging on your Wax.
• After operation, turn the Wax Heater ‘OFF’.

Safety and Cleaning

1. This appliance is for professional use only.
2. Do not immerse the Heater in water or use it in an area where it could be splashed.
3. If the Power Supply Cord is damaged, it must be replaced by an authorized service agent.
4. Never leave Wax Heater switched on when the Metal Insert is empty.
5. Clean unit with Solvent – Wax Remover Citrus Clean.
6. Do not use other brands’ solvents as they may cause damage and toxic fumes when heat is activated. Keep switches and Temperature Control Dial free of Wax.